When Kai blows coat, here’s what I do. Rake first, on a dry coat. Then the slicker for the leftover fluff. Then the comb, last pass. If it’s a bath night, he gets a TropiClean bath and the Shernbao dryer, and once he’s actually dry I rake again. Then the robot vacuum does the floor. That’s it. It won’t stop the shedding. Nothing does. It just gets the wool off the dog before it lands on the couch.
Kai is my red merle Aussie. He came from a Virginia breeder, he was born July 2024, and he’s about 48 lb now.
Kai’s blow day routine
As an Amazon Associate and Chewy affiliate, we earn from qualifying purchases. The price you pay doesn’t change.
Kai’s blow day routine
When Kai’s undercoat is really moving, this is the order I work in. The bath and dryer only come in on bath nights.

Rake
Start here. It pulls the loose undercoat out before it ends up on the couch. Outside, or over something you can shake out.
Maxpower Planet Original Pet Grooming RakeSlicker
After the rake I go over him with the slicker to grab the fluff that’s left.
Chris Christensen Big G slickerBath Bath nights only
Bath night, only if the rake isn’t enough. Rake first. Rinse until the water runs clear.
TropiClean Perfect Fur shampooDryer Bath nights only
The high-velocity dryer blows out a lot of the loose undercoat that’s still in there. Start farther away, lower force. Keep the nozzle moving.
Shernbao high-velocity dryerRobot vacuum run
Whatever hits the floor, the robot picks up after. Long undercoat can wrap the brush roll, so check it after heavy shedding.
Dreame L40 Ultra Gen 2 Robot Vacuum & Mop
How I know it’s a real blow
Fur on the floor on a random Tuesday isn’t a blow. I wait until the undercoat is coming out in clumps. That’s when I set up: door closed, towel down. Aussie hair migrates, and a shut door keeps it in one room.
Step 1: Rake
The Maxpower Planet rake is where it starts. Dry coat only. I go back and sides first, slow strokes through the thick places, and I clear the teeth as I go. Light hand on the thin spots and his ears. If you press hard it can scratch, so if his skin goes pink or he shifts away, I stop.
On blow weeks you’ll fill a towel with wool. Do it outside or over something you can shake out, because the hair goes somewhere.
More on the rake and why it’s not a brush: best brush for an Australian Shepherd
Step 2: Slicker
Then the Chris Christensen Big G. This is the fluff pass, not the deshed. It pulls the leftover fluff after the rake and doesn’t shred his coat doing it. On its own it won’t get you through a blow, because it’s a top coat brush and the undercoat is the problem.
Step 3: Comb
Comb last with the Pettom. I run it through his pants, his armpits and behind his ears, since that’s where the rake and slicker miss stuff. If it catches, that’s a mat I missed. The comb finds it. It doesn’t fix it.
When the comb is done, I bag the fur before the door opens.
Step 4: Bath, but only on bath nights
Not every blow day is a bath day. If the coat is clean and the house is hairy, a bath is the wrong move. Rake first. A bath won’t fix your floors.
When it is a real bath, it’s TropiClean Perfect Fur. One shampoo, short session. I work a small amount through his ruff, saddle and pants and rinse until the water runs clear. Then I towel the drip off.
Shampoo notes are on the dog shampoo guide.

Step 5: Dryer
The Shernbao Super Cyclone blows his double coat actually dry and pushes the loose undercoat into a drift, so the towel isn’t the whole job. It’s loud on purpose, so the door stays closed.
I start farther away on lower force, with treats, and keep the nozzle moving. Don’t cook his skin. If he leans away, I stop.

Step 6: Rake again
Once he’s actually dry and the loose undercoat is sitting in a drift, I rake. Not before. Dragging a deshedder through a wet coat is how you scratch. The dryer just gets you to the rake sooner.
More on how bath night runs: Shernbao dryer page
Step 7: Robot run
The hair that still hits the floor is the robot’s job. Ours is the Dreame L40 Ultra Gen 2. I had a Roomba first. It did the floors, but it didn’t empty itself and it didn’t mop, so I switched. The Dreame vacuums and mops in one run, and the dock empties it.
Raking first means less undercoat for the robot to pick up. Long undercoat can still wrap the brush roll, so check it after heavy shedding.
Kai barked at it for the first six months. I’d put him in another room or run it from the app on my iPhone while we were out. Now he sits right next to it.
The full robot write-up: best robot vacuum for Australian Shepherd hair

What I don’t do
- I don’t shave him. An Aussie’s coat is his shade. You want smaller tumbleweeds, not a bald dog.
- I don’t rake a wet coat, and I don’t lean on the rake.
- I don’t bathe him to fix a hairy house. That’s a rake job.
- After a real deshed, I re-check his harness fit.
Everything Kai uses is on the kit page.
Blowing coat FAQ
What should I do when my Australian Shepherd is blowing coat?
Rake on a dry coat, then a slicker for the fluff, then a comb as the last pass. On bath nights, bathe, dry him all the way, then rake again. Run a robot or vacuum after for the floor.
Should I rake before or after the bath?
Both, for us. I rake before, and on bath nights I rake again once he’s fully dry. Never on a wet coat.
Does a bath or a dryer stop the shedding?
No. A bath moves dirt and loose coat, and the dryer moves loose undercoat into a drift. Neither one replaces the rake.
Should I shave my Aussie to stop the shedding?
No. A non-shedding Aussie doesn’t exist, and the coat is his shade.

I’m Leny, and Kai is my Australian Shepherd, the reason there’s dog hair on every floor of my house. This site is the gear and food Kai actually uses, with what worked for us and what didn’t, so you can spend less and get it right the first time.
